§ 1628. Testing requirements for street base and paving.

(a)

Tests shall be conducted of street base and paving as per table 16-6.

Table 16-6
Testing Requirements and Standards

Type of Test to be Performed	Minimum Number of Tests	Testing Standards
Sub-grade Compaction	Each 500 linear feet of roadway	95% Max Density ASTM-1557 Field Tests ASTM D-1556 F-2922 and D-2167
Base Compaction	Each 500 linear feet of roadway	100% Max Density ASTM-1557 Field Tests ASTM D-1556 F-2922 and D-2167
Asphalt Density	Each 1,000 linear feet of roadway	92% Laboratory Density
Asphalt Thickness	Each 500 linear feet of roadway	Deficient in thickness not more than ¼"

 

(b)

When testing is required, it is the responsibility of the developer to insure that all required tests are made and reported to the public development department for review and approval by the county roads superintendent. The cost of all testing and quality control shall be performed at the expense of the developer by qualified testing laboratories.

(Ord. No. 17-003 , § 1, 10-2-2017)