§ 3-047. Dwelling, multiple family.

(a)

Dimensional requirements. In addition to the applicable dimensional requirements specified in table 2-2 for the zoning district in which the use is located, maximum residential density, minimum lot width, and minimum heated floor area per dwelling unit shall be as follows:

Maximum residential density (dwelling units per acre)	R-2 zoning district	R-3 zoning district
Served by public water and public sewer	3.0	8.0
Minimum lot width (feet)
Served by public water and public sewer	35	20
Minimum heated floor area per dwelling unit (square feet)	900	900

 

(b)

Dwelling units per floor. No more than eight dwelling units per floor may be included within a building used exclusively as a multi-family dwelling.

(c)

Building separation. Multi-family buildings shall be separated from each other by a distance of at least 75 feet, except for the sides of such buildings which shall be separated from each other by a distance of at least 40 feet.

(d)

Community recreation. Multi-family residential developments consisting of 50 or more dwelling units shall provide a minimum of 20 percent of the total land area for community recreation, and ten percent ten percent of the total land area (i.e., no less than one-half of the community recreation minimum requirement) shall consist of active recreation as approved by the public development director.

(Ord. No. 17-003 , § 1, 10-2-2017)